Production-ready 3D CAD with manufacturing drawings

Aisha KrishnanPrincipal Mechanical Engineer · Ahmedabad, India4.8(182)317 orders deliveredDesignOn-site available

Scope of this service

From sketch or sample to a parametric model and a drawing package a machine shop or moulder can quote without coming back with questions.

What you provide

Concept sketch or reference sample
Functional requirements
Target material & process
Volume & cost target

What you receive

Parametric 3D CAD model
2D manufacturing drawings with GD&T
BOM
DFM review notes

What is not included

Tooling design
Prototype manufacture
Supplier sourcing

Packages

Basic

Focused scope$270

3-day delivery1 revision

Parametric 3D CAD model2D manufacturing drawings with GD&T

StandardMost chosen

Standard delivery$785

6-day delivery2 revisions

Parametric 3D CAD model2D manufacturing drawings with GD&TBOM

Premium

Premium with sign-off support$1,195

20-day delivery3 revisions + 30 days support

Parametric 3D CAD model2D manufacturing drawings with GD&TBOMDFM review notesReview meeting (60 min)Coordination with your other disciplines

Add-ons

Priority delivery (halve the timeline)+$110

Extra revision round (+2 days)+$60

Editable native source files+$50

60-minute technical review call (+1 day)+$125

Technical specification

Software used

Standards & codes

Industries

Suits project scale

Professional sign-off is a separate scopeThis listing delivers engineering work, not certification. Platform verification is not a licence to practise, and no badge here authorises stamping or sealing in any jurisdiction. If your submission requires a registered professional, engage one registered where the project is located.

Frequently asked

What exactly do I need to provide before you start?

To begin I need: Concept sketch or reference sample; Functional requirements; Target material & process; Volume & cost target. If anything is missing I will tell you within the first working day rather than guessing and building on a wrong assumption.

Can you stamp or seal the drawings for my jurisdiction?

Not through this listing. Platform verification confirms credentials; it is not a licence to practise. If your jurisdiction requires a stamped submission, hire a locally registered engineer for sign-off — I can prepare the package so that review is straightforward, and I can recommend how to scope it.

Which standard will you design to?

I normally work to ASME BPVC Section VIII, ASME Y14.5, ISO 2768. Nominate your standard and jurisdiction in the brief and I will confirm before starting; the design basis memo records the choice explicitly.

What if the scope grows once you see the files?

I raise a change request with the cost and schedule impact before doing the extra work. The scope is never silently expanded, and you approve any change before it becomes billable.

Do I own the output?

Yes. On final payment the deliverables and their IP transfer to you. Native source files are included in the Premium package or available as an add-on.

Reviews

4.54.53 reviews · 67% would hire again

Technical quality4.8

Accuracy4.7

On-time delivery4.7

Communication4.5

Documentation quality4.7

Scope management4.6

Northwind EnergyUnited Kingdom · 3D CAD model · Small project

4.71 month ago

Responsive, clear, and realistic about what could be achieved in the timeline we had. Pushed back on one requirement that would have been unsafe to rush, which we appreciated even though it was not what we wanted to hear at the time.

Technical quality4.8Accuracy4.5On-time delivery4.8Communication4.3Documentation quality4.8Scope management4.8Would hire again

Technical Director, Brightline InfrastructureAustralia · DFM review report · Large project

4.510 months ago

Took our incomplete brief, came back with the right questions, and produced a design basis we ended up using as the reference document for the whole project. Would hire again without hesitation.

Technical quality4.6Accuracy4.5On-time delivery4.7Communication4.9Documentation quality4.8Scope management4.4

Engineering Manager, Cobalt Marine ServicesNorway · DFM review report · Large project

4.35 months ago

Technical quality4.9Accuracy5.0On-time delivery4.6Communication4.3Documentation quality4.5Scope management4.7Would hire again

Related services

Comparable scopes from other engineers

4DaysOn-site available
Design
Production-ready 3D CAD with manufacturing drawings
Die Engineering
4.6(191)4 deliverables
Mei-Ling FaroukFrom$585
2DaysOn-site available
Reverse engineering
Reverse engineering from scan or physical sample
Die Engineering
4.8(64)4 deliverables
Aisha KrishnanFrom$450
2DaysOn-site available
Analysis
Piping design & stress analysis to ASME B31.3
Die Engineering
4.5(23)4 deliverables
Aisha KrishnanFrom$720
5DaysOn-site available
Analysis
FEA structural analysis with a defensible report
Die Engineering
4.6(163)4 deliverables
Mei-Ling FaroukFrom$325

Scope of this service

From sketch or sample to a parametric model and a drawing package a machine shop or moulder can quote without coming back with questions.